User`s guide

ZyWALL IDP 10 User’s Guide
85 Chapter 7 Log and Report
7.2 Report
You can send logs by e-mail or send them to a syslog server.
7.2.1 E-Mail
Use the E-Mail Setup screen to configure to where and when the ZyWALL is to send logs by
e-mail. Logs may be e-mailed as soon as the log is full (see Report Schedule).
Click REPORT under the LOG & REPORT heading in the MAIN MENU of the web
configurator, and then click the E-MAIL tab.
Table 22 View Log
LABEL DESCRIPTION
Logs
Display Select a log category from the drop down list box to display logs within the
selected category:
All Logs (view all logs)
System Log (view logs related with the ZyWALL such as login to the ZyWALL or
startup)
IDP Event Log (view logs related to detected intrusions)
Clear Click this button clear all the logs.
Refresh Click this button to refresh the log screen.
Page Use the dropdown list to select the log page you want.
|<Prev Next >| Use these buttons to navigate between first, previous, next and last pages of the
logs.
# This displays the number of the log that was recorded.
Time This field displays the date and time the log was recorded. Click the Time label to
sort logs in ascending or descending order.
Message This field states the reason for the log.
Source This field lists the source IP address and the port number of the packet that
caused the log.
Destination This field lists the destination IP address and the port number of the packet that
caused the log.
Action This field displays the action taken on the packet that caused the (IDP event) log.
Note This field displays additional information about the log entry.