User`s guide

ZyWALL IDP 10 User’s Guide
Chapter 7 Log and Report 86
Figure 47 Report: E-Mail
The following table describes the fields in this screen.
Table 23 Report: E-Mail
LABEL DESCRIPTION
E-Mail Setup
Active Click this button to enable e-mailed reports and allow editing of the fields below.
Report
Schedule
Select the frequency of e-mailed reports: weekly, daily, hourly, or only when the log is
full. If the Weekly or Daily option is selected, specify a time of day when the e-mail
should be sent. If the Hourly option is selected, specify the time (minutes and hour)
that the e-mail should be sent. If the Weekly option is selected, then also specify
which day of the week the e-mail should be sent. If the When Log is Full option is
selected, a log is sent as soon as the log fills up.
Day Select which day of the week to send the logs.
Time Type the time of the day in 24-hour format (for example 23:00 equals 11:00 PM) to
send the logs.
Mail Server Type the IP address or URL of the mail server. If this field is left blank, reports will not
be sent via e-mail. Your mail server must not request a username or password. If it
does, you must disable this first before using it to send ZyWALL reports. If this field is
left blank, reports will not be sent via e-mail.
Send From Type the sender e-mail address in this field.
Recipient(s) Type up to three e-mail address(es) separated by semi-colons of people who should
receive these reports.