User`s guide

ZyWALL 10/10 II/50 Internet Security Gateway
29-4 Troubleshooting
29.6 Problems with Remote Management
Table 29-6 Troubleshooting Remote Management
PROBLEM CORRECTIVE ACTION
Refer to the Remote Management Limitations section for scenarios when
remote management may not be possible.
When NAT is enabled:
Use the ZyWALL’s WAN IP address when configuring from the WAN.
Use the ZyWALL’s LAN IP address when configuring from the LAN.
Refer to the Problems with the LAN Interface section for instructions on
checking your LAN connection.
Cannot access the ZyWALL
from the LAN or WAN.
Refer to the Problems with the WAN Interface section for instructions on
checking your WAN connection