User guide

in ewc, all values are correctly set to the device.
(3) Login "www.eurodns.com" with the Username=xxx, Password=xxx. Click "My
Domains" at the leftward, then click "DNS" icon.You will see "Hostname/Alias"
named "test1" bind an IP Address,but this address is not 172.25.17.77.Also in ewc,
there is not any log like "Update domain name test1.zyxel.com.es with
IP:172.25.17.77 successfully".
(4) Do Step (2) in ewc, then check again according to Step (3). Now You will see
"Hostname/Alias" named "test1" bind an IP Address 172.25.17.77.In ewc,there is
a log "Update domain name test1.zyxel.com.es with IP:172.25.17.77
successfully".
15. [BUG FIX] SPR ID: 080109317
Symptom: CLI command "sys tos allow_FinPshAck" display wrong information in
console.
Condition:
(1) Enter SMT 24.8, type "sys tos allow_FinPshAck", will display following wrong
information: "Usage: Usage: sys tos block_FinPshAck [on | off]"
16. [BUG FIX] SPR ID: 071210446
Symptom: There’s no log about unrated web sites in the log page under certain
condition.
Condition:
(1) CI "sys romreset". Then register Content filter trial licence.
(2) Enable content filter. Then enable external Database Content Filtering. Enable log
for unrated web pages but disable block for it.
(3) Create a policy which enables external Database service.
(4) Browse the web site "www.3dwuxi.com", there's no logs about unrated web sites
in the log page.
17. [BUG FIX] SPR ID: 080114605
Symptom: ZyWALL can't send allowed CF log to CF report server
Topology:
PC---- (LAN) ZyWALL (WAN) ---- CF report server
Condition1:
(1) Register CF service on alpha.myzyxel.com
(2) Configure CF log server address using CLI command
"ip cf externalDB exDblogserver 220.128.56.38"
(3) Go to eWC>SECURITY>CONTENT FILTER>General, do following settings
Enable Content Filter = selected
Enable External Database Content Filtering = selected
Matched Web Pages, unselect Block, select Log
Enable Report Service = selected
(4) Go to eWC>SECURITY>CONTENT FILTER>Policy insert one policy,
(5) Go to eWC>SECURITY>CONTENT FILTER>EDIT POLICY>GENERAL,
Active this policy, Address Setup = Any