User guide

For more detail information, please refer to appendix 14.
13. [FEATURE CHANGE]
WAS: When CNM was ON, device's alerts will stop mailing to the configured alert
receiver at LogSetting page.
IS: No matter CNM is ON or OFF, device's alerts will mail to the configured alert
receiver.
14. [BUG FIX] SPR ID: 070725773
Symptom: Socket leakage problem.
Condition:
(1) WAN configures as PPPoE, idle timeout is 10 sec.
(2) Go to SMT 1, configures DDNS, and save them.
(3) Do step (2) many times. Finally there will be shortage of sockets.
(4) Then go to SMT 24.8, display socket by CI command “sys sock”, you will see
many socket leakage.
15. [BUG FIX] SPR ID: 070827751
Symptom: Can't add '*' Domain name record on DNS page via Vantage.
Condition:
(1) Let ZyWALL register to Vantage.
(2) Add a DNS record with empty Domain name.
(3) CNM agent returns -22051 and set fail.
16. [BUG FIX] SPR ID: 071109669
Symptom: ZyWALL can’t record system report based on IP address which is not in
the same subnet of ZyWALL itself.
Condition:
Topology:
(Bridge mode)
PC----- (LAN) ZyWALL_A (WAN) ----ZyWALL_B----Internet
PC: 10.0.0.34
ZyWALL_A:192.168.10.40
ZyWALL_B (LAN):10.0.0.1, ip alias: 192.168.10.1
(1) Enable Collect Statistics of ZyWALL_A under system reports.
(2) PC visits a web page on the internet.
(3) We can’t see the statistics of host IP reports in ZyWALL_A.
17. [BUG FIX] SPR ID: 070828810
Symptom: The GUI display abnormal in firewall page.
Condition:
(1) Go to eWC>SECURITY>FIREWALL>Rule Summary.
(2) The "Modify" label in Rule Summary table is lower than others.