User guide

(4) In Reports>IDP page, select "Top Entry By Signature Name" and there is no
related information.
23. [BUG FIX] SPR ID: 071013726
Symptom: Wrong description with CI "sys update display"
Condition:
(1) Input CI "sys update display" and console shows "register server address xxxx"
and "register server path xxxxx"
(2) But the description should be "update server address xxxx" and "update server
path xxxxx"
24. [BUG FIX] SPR ID: 071019008
Symptom: WAN will lose the IP address when modify the metric of WAN.
Condition:
(1) Set the WAN1, WAN2 as ethernet encapsulation and get WAN IP address
automatically from ISP.
(2) Modify the WAN2 metric from 2 to 3.
(3) Then the WAN2 IP address will lose and need to renew to get the IP address.
25. [BUG FIX] SPR ID: 071017898
Symptom: Can’t find IM signatures through Attack type IM in
eWC>SECURITY>IDP>Signature.
Condition:
(1) Register UTM service from eWC>REGISTRATION>Registration.
(2) Update signatures from eWC>SECURITY>IDP>Update.
(3) Goto eWC>SECURITY>IDP>Signature, select attack type IM, but no IM
signatures found.
26. [BUG FIX] SPR ID: 071011647
Symptom: Bandwidth Management cannot control SIP P2P traffic.
Condition:
LAN: 192.168.1.1 WAN: 192.168.30.113
P2002A----------------------- ZyWALL -------------------P2002B
192.168.1.39
192.168.30.114
ZyWALL:
(1) Set with CI command "sys romr|y"
(2) Set with CI command "ip alg enable SIP_ALG"
(3) Firewall=disabled
(4) Edit web eWC/NAT/Port Forwarding, WAN Interface=WAN1,
index1/Active=enable, Aindex1/Name=sip, index1/Incoming Port(s)
=5060-5060, index1/Server IP Address= 192.168.1.39
(5) Edit web eWC/BW MGMT/Class Setup Interface=LAN, Add Sub-Class, Class
Name= SIP, Bandwidth Budget=200, Priority=7, Enable Bandwidth
Filter=enable, Service =SIP, Source & Destination IP Address = 0.0.0.0