User guide

44. [BUG FIX] SPR ID: 070228410
Symptom: ZyWALL BW MGMT class search order shows wrong when moving
classes.
Condition:
(1) Restore romfile(password:fenris120) from SPR, go to Class Setup under WAN1.
(2) Add sub-class FTP, bandwidth budget 180k, priority:5, service type:FTP.
(3) Add sub-class PC1, bandwidth budget 150k, priority:4, borrow,service
type:custom, Source IP:single 192.168.1.37.
(4) Can not move class 1 to 2.
45. [BUG FIX]
Symptom: Modem initilization process cannot finish, LG-340E CDMZ Wireless
phone.
Topology:PC-----(LAN)ZyWALL (AUX0)---- LG-340E CDMA Wireless phone
Condition:
(1) Connect this CDMA phone(LG-340E) to my PC directly (Baud rate
115200).
(2) Key in the AT commands "AT OK AT+CRM=1 OK AT$LGPKT=3 OK
ATDT#777 CONNECT".
(3) ZyWALL print message ※AUX Port init Done Modem Init Failed!!!§ in
console.
46. [BUG FIX]
Symptom: BM for SIP doesn't work on WAN interface.
Condition:
(1) Add a BM filter for SIP on WAN interface.
(2) Enable SIP ALG.
(3) SIP connection can be built successfully with Customer's SIP server.
(4) But SIP Traffic can't be monitored.
47. [BUG FIX]
Symptom: Some formats of logs should be consistent.
LOG message in EWC->LOGS->View Log
WAS:
---------------------------------------------------------------------------------------------------
|#| Time | Message
|Source|Destination| Note |
---------------------------------------------------------------------------------------------------
| | |WLAN STA Association | |
|MACAddr:0013026c13a3|
---------------------------------------------------------------------------------------------------
| | |WLAN STA Association Again | |
|MACAddr:0013026c13a3|
---------------------------------------------------------------------------------------------------