User guide

Topology:
(192.168.2.1)
(192.168.1.1) wan2(192.168.1.3) wan1(192.168.2.2)
pc------------------------Router----------------------------------DUT--------------------------
(192.168.1.2) | |
---------------------------------------------------------------------
(1) Disable firewall on DUT
(2) Set DUT WAN on A/A mode.
(3) Put a PC on WAN2 subnet, and its IP is same subnet as WAN2 interface.
(4) PC ping 192.168.2.2 and it can not receive the reply packets.
6. [BUG FIX]
SPR ID: 070118895, 070118893, 070118894
provide a CI command to customize SMTP for sending log port
7. [BUG FIX]
SPR ID: 061221255
Symptom: Set VPN gateway with certificate but got error message on eWC.
Condition:
(1) Import the certificate "zyxel", password "test", which is provided by CSO.
(2) Configure a VPN-gateway (phase 1).
(3) Select just imported certificate as Authentication Key.
(4) "Apply" to save the setting.
(5) Try to change any configuration of phase1, the ZyWALL will generate an
warning error: "An error was detected on this page. Extra characters
were detected in the item HTML item value: MAILTO=[e-mail],
CN=zyxel, OU=ms, O=sen, L=hamburg, ST=hamburg, C=de".
8. [BUG FIX] ITS #15262
Symptom: There's an delay of 2 seconds when checking DNS with NSLOOKUP
if using the ZyWALL as an DNS server.
Condition:
Toplolgy:
PC-----(LAN) DUT (WAN)----internet
(1) PC must join to a domain name.
(2) Advance->DNS->System, and put in a public DNS server in the list or get one
dynamically.
(3) Advance->DNS->Cache, enable Cache Negative DNS Resolutions.
(4) On the PC, config the DNS server as the LAN IP address of DUT
(5) Go to start->run->nslookup, issue such command: "zyxel.com" or
"www.baidu.com" in PC, you will see the timeout message.
9. [BUF FIX]
SPR ID: 070306386,070306387,070306388
Symptom: ZyWALL shows error message and failes to forward packets when
changing the WAN speed in bridge mode.