User guide

Condition:
(1) Change ZyWALL to bridge mode.
(2) Use the following command to change the WAN speed
>ether edit load 2
>ether edit speed 10/full
>ether edit save
(3) Then the error "Fail to lock read.[record number=128, entry number=0]" shows
up. Both LAN users and the device could not communicate with internet.
10. [BUG FIX]
SPR ID: 070117842
Symptom: There will be a large latency in VPN1 if an new SA set up.
Condition:
Toplolgy:
PC1
|
| LAN
ZW35A(DUT)
| WAN
|
----------+-----------+------------+--------------------
| |
| WAN | WAN
ZW35B ZW5
| LAN
|
|
PC2
VPN1: ZyWALL35B build a VPN with ZW35A
VPN2: ZW5 build a VPN with ZW35A
(1) Build the VPN1 from ZW35B and ping PC1 from PC2.
(2) Build VPN2. from ZW5
(3) There will be a large delay in the ping from PC2 to PC1.
11. [BUG FIX]
SPR ID: 070118898, 070118896
Symptom: The format and content of "System Resources" is shown different in
eWC>>Home and SNMP management software.
Condition:
(1) See "System Resources" in eWC>>Home. They are shown like:
Flash 9/16 MB
Memory 42/64 MB