User guide

============================
task name = dns-proxy, pc = f6f30
tosFree is not in network task...
task name = dns-proxy, pc = f6f30
tosFree is not in network task...
task name = dns-proxy, pc = f6f30
tosFree is not in network task...
task name = dns-proxy, pc = f6f30
============================
(4) Can’t reproduce
15. [BUG FIX] ITS #16021
Symptom: ZyWALL VPN does not allow two same Local/Remote address rules
when remote is dynamic.
Condition:
(1) Build one VPN rule with local policy 192.168.1.1/24 and dynamic remote and
active the VPN rule
(2) Build another VPN rule with the same local and remote network policy and
active the VPN rule
(3) Then ZyWALL VPN reminds that Local/Remote address conflicts with each
Other.
16. [BUG FIX] SPR ID: 070116769, 070116768
Symptom: The DUT will crash after receiving bouncing portscan traffic.
Condition:
(1) Configure eWC>Advanced>NAT>NAT Overview, enable WAN1 NAT with
SUA
(2) Configure eWC>Security>Firewall>Default Rule, WAN1 to WAN1 = Permit
(3) Open 4 portscan tools to scan WAN1 IP from WAN site, DUT crash after a
peroid time
17. [BUG FIX] SPR ID: 070322438
Symptom: ZyWALL often occurs "Cannot receive a complete result from the
external server" when enable CF.
Condition:
(1) Enable the external server and some category items.
(2) Sometimes the ZyWALL cannot block the url which should be blocked by the
category.
(3) If you check the log, there are many "Cannot receive a complete result from the
external server".
18. [BUG FIX] SPR ID: 070510394
Symptom: Device sends unnecessary queries to CF external server.