User guide

WAS: 19/64MB
IS: 19/64 MB
(2) Time representation:
Modify eWC>home page>Up Time as a running clock.
(3) Firmware Version
Give eWC>Homepage>Firmware Version a hyperlink to eWC>Maintenance>
F/W Upload.
(4) Security Services:
1. Give eWC>Homepage>IDP/Anti-Virus Definitions a hyperlink to eWC>IDP>
Update.
2. Add eWC>Homepage>IDP/Anti-Virus Expiration Date a hyperlink to
eWC>Anti-Virus> Service.
3. Give eWC>Homepage>Anti-Spam Expiration Date a hyperlink to
eWC>Registration> Service.
4. Give eWC>Homepage>Content Filter Expiration Date a hyperlink to
WC>Registration> Service.
(5) Interfaces
1. Give each eWC>interface a hyperlink to link to the corresponding
configuration page.
WAN1/WAN2 link to eWC>Network>WAN page
Dial Backup link to eWC>Network>WAN>Dial Backup page
LAN link to eWC>Network>LAN>LAN page
IP alias1/2 link to eWC>LAN>IP alias 1/2 page
WLAN link to eWC>Network>WLAN>WLAN page
IP alias1/2 link to eWC>WLAN>IP alias 1/2 page
DMZ link to eWC>Network>DMZ>DMZ page
IP alias1/2 link to eWC>DMZ>IP alias 1/2 page
(6) Remove underlines from the links in eWC>Homepage.
(7) Put eWC>Homepage a warning message for Turbo card is not installed.
(8) If there is no Turbo Card installed, the Security Services should be presented
accordingly:
WAS: Intrusion Detected 0
Virus Detected 0
IS: Intrusion Detected N/A
Virus Detected N/A
5. [ENHANCEMENT]
Support dual multiple WAN devices for IPSec HA scenario.
6. [ENHANCEMENT]
Change the Anti-Spam wording in log.
WAS: "Mail Parser buffer is overflow!"
IS: "AS checking bypassed as a mail header line exceeds 1024 characters!"
7. [ENHANCEMENT]
(1) Remove the eWC check box: Enable Firewall for VPN traffic.