User guide

10. [BUG FIX][060517002]
Symptom: Some wordings in "eWC-＞ANTI-VURUS" are not correct.
Condition:
(1) Go to "eWC-＞ANTI-VIRUS-＞General".
(2) The wording "POP3 (TCP/UDP 110)” should be ”POP3 (TCP 110)"
(3) The wording "SMTP (TCP/UDP 25)” should be ”POP3 (TCP 25)"
11. [BUG FIX][060423782]
Symptom: The device can’t enable multiple proposal in IKE rule.
Condition:
(1) Add an IKE rule using "Preshare key" as authentication type.
(2) Add another IKE rule using "Certificate" as authentication type, different
preshare key and enable the multiple proposal.
(3) This IKE rule cannot save.
12. [BUG FIX][060515863]
Symptom: In eWC>HOME>Network Status>more page, wireless cannot get correct
port status.
Condition:
(1) Insert G-110 wireless card.
(2) Switch device to bridge mode.
(3) Go to eWC>HOME>Network Status>more page.
(4) The "Port Status" of Wireless Card is 100M/Full, but SMT is 54M.
(5) The "Port Status" of WLAN Interface has no any information.
13. [BUG FIX][060427219]
Symptom: In PPTP encapsulation, enable VPN, AV and AS, PC can not receive the
mail via VPN tunnel.
Condition:
PC1(mail-server:argosoft1.8)--(DMZ)ZW70(WAN:PPPoE)---(WAN:PPTP)ZW5(L
AN) ------PC2(Outlook Express)
(1) Establish a VPN tunnel between ZW70 and ZW5.
(2) In ZW70, enable AV, disable AS.
(3) In ZW5, enable AS.
(4) PC2 can’t receive the mail from PC1.
14. [BUG FIX][060424803]
Symptom: ZyWALL crashes after changing MAC address.
Condition:
(1) Take a registered device and reboot it.
(2) After device boot up, use CLI "sys my serviceR" to refresh the registration.
(3) When you get the "Service refresh successfully" message, use the CLI "sys atwz
0000aazzzzzz" (Change the MAC address you want) to change the MAC address.
(4) Device will crash when rebooting.