User guide

15. [BUG FIX][060509567]
Symptom: Bridge mode Network Status Bridge Port loss DMZ port.
Condition:
Bridge mode in GUI Home> Network Status>More> Bridge Port loss DMZ port.
16. [BUG FIX][060509570]
Symptom: VPN rule swap fails on phase one ID check.
Condition:
Topology:
(LAN) Bridge_A (WAN)=======(WAN) Bridge_B(LAN)
(1) On Bridge_A, add a VPN rule:
IKE: Static rule, enable XAUTH and set as client mode.
Local ID: Type=DNS Content = d.c.b.a
Peer ID: Type=DNS Content = a.b.c.d
IPSEC Policy: Local=Single 1.1.1.1, Peer=Single 2.2.2.2
(2) On Bridge_B, add two VPN rules:
1. Rule one:
IKE: Static rule, XAUTH is disabled.
Local ID: Type=DNS Content = a.a.a.a
Peer ID: Type=DNS Content = b.b.b.b
IPSEC: Local=Single 3.3.3.3, Remote=Single 4.4.4.4
2. Rule two:
IKE: Dynamic rule, enable XATUH and set as server mode.
Local ID: Type=DNS Content = d.c.b.a
Peer ID: Type=DNS Content = a.b.c.d
IPSEC Policy: Local=Single 1.1.1.1, Remote=Single 2.2.2.2
(3) Dial VPN tunnel from Bridge_A to Bridge_B, the VPN tunnel will fail to build
up by phase one ID mismatch.
17. [BUG FIX][ 060426102]
Symptom: User can’t receive mail through VPN tunnel when WAN is in PPTP
encapsulation.
Condition:
Topology:
PC1 (mail client) --- ZW5 (PPTP) === VPN tunnel === ZW70 ---- PC2 (mail
server)
(1) Establish VPN tunnel between ZW5 and ZW70.
(2) ZW5's WAN is PPTP, enable AS.
(3) ZW70's WAN can be any encapsulation type, disable AS.
(4) PC1 receives mail from PC2 but it fails.
18. [BUG FIX][060503068]
Symptom: Asymmetrical route cannot work.