User guide

22. [BUG FIX][060427214]
Symptom: Redundant gateway sometimes can’t be saved if it's in domain name
format.
Condition:
(1) Create an IKE rule with IPSEC HA is enabled.
(2) Configure a non-exist domain name as redundant gateway.
(3) Let Domain Name Update Timer query this non-exist domain name. It will fail.
(4) Try to modify the domain name with a correct one and save it.
(5) Several minutes later, users will find the domain name has not been changed; it's
still the old one.
23. [BUG FIX][060329452]
Symptom: In eWC>VPN, VPN Rules page shows incorrect domain name.
Condition:
(1) Go to eWC>DNS>DDNS, set a WAN domain name as
"123456789.123456789.123456789.123456789.123456789.123456789.123".
(2) Go to eWC>VPN, create a VPN rule using My domain as
123456789.123456789.123456789.123456789.123456789.123456789.123".
(3) While applying the setting, VPN Rules page shows incorrect domain name.
24. [BUG FIX][060420654]
Symptom: Wireless client still can scan wireless network after disabled wireless
card.
Condition:
(1) Plug in G100/G110 wireless card.
(2) Go to eWC/Network/Wireless Card/Wireless Card, enable wireless card and set
ESSID as "testWlan".
(2) Wireless Client can scan the "testWlan" network by Odyssey tool.
(3) Disable wireless card.
(4) Wireless Client still can scan the "testWlan" network by Odyssey tool.
25. [BUG FIX][060426084]
Symptom: ZyWALL crashes when setting NAT address mapping rules.
Condition:
(1) Go to eWC＞NAT＞Address Mapping page.
(2) Add a new rule, configure
Type= Many-to-Many-Overload,
Local Start IP= 1.1.1.1
Local End IP= 3.3.3.3
Global Start IP= 4.4.4.4
Global End IP= 5.5.5.5
(3) Click "Apply" button, then ZyWALL crashes.
26. [BUG FIX][060424869]
Symptom: Change WAN IP in GUI, the "Private" option in SMT11.1->Edit IP will
be set as "NO".