User guide

IKE: Static rule, enable XAUTH and set as client mode.
IPSEC Policy: Local=Single 1.1.1.1, Remote=Single 2.2.2.2
(2) On Bridge_B, add two VPN rules:
1. Rule one:
IKE: Static rule, enable XAUTH and set as server mode.
IPSEC: Local=Single 3.3.3.3, Remote=Single 4.4.4.4
2. Rule two:
IKE: Dynamic rule. XATUTH is disabled.
IPSEC Policy: Local=Single 1.1.1.1, Remote=Single 2.2.2.2
(3)Dial VPN tunnel from ZyWALL_A to Bridge_B, the VPN tunnel will be
successfully
built up with Bridge_B’s rule two.
32. [BUG FIX][060411623]
Symptom: The eWC>Firewall>Default Rule page will pup up JavaScript error in
bridge mode.
Condition:
(1) Go to eWC>FIREWALL>Default Rule page.
(2) Click Reset button, ZyWALL pup up JavaScript error.
33. [BUG FIX][060425022]
Symptom: Device crash (Soft watchdog starts up.)
Condition:
(1) Firewall+NAT+AV+IDP+AS+AS black list+LB
(2) LAN has a mail client、mail server；DMZ has a mail client、2 mail server；
WLAN has a mail client. All of them are on IxLoad
(3) Run IxLoad 10 minutes，device crash
34. [BUG FIX][060418336]
Symptom: Traffic can’t go out after use the tfgen tool.
Condition:
(1) Restore default rom file.
(2) In LAN, use the TfGen with following setting.
Utilization: 40000
Destination: 168.95.1.1
Port: 777
After use the tfgen, all the traffic from LAN can’t go outside.
Modifications in V 4.01(WZ.0)b1 | 04/24/2006
1. [ENHANCEMENT]
(1) Add UTM reports for IDP/AV/AS.
(2) Change linkage from GUI>Logs>Reports to GUI>UTM Reports>System
Reports.
(3) Re-layout UTM Home GUI for ZyWALL 4.01.