User's Manual

Chapter 30 ADP
ZyWALL USG 100/200 Series User’s Guide
516
The following table describes the screens in this screen.
30.3 The Profile Summary Screen
Use this screen to:
• Create a new profile using an existing base profile
• Edit an existing profile
• Delete an existing profile
30.3.1 Base Profiles
The ZyWALL comes with base profiles. You use base profiles to create new profiles.
Figure 398 Base Profiles
Table 165 Anti-X > ADP > General > Add
LABEL DESCRIPTION
Enable Select this check box to turn on this anomaly profile to traffic direction policy.
From Traffic direction is defined by the zone the traffic is coming from and the zone
the traffic is going to.
Use the From field to specify the zone from which the traffic is coming.
Select ZyWALL to specify traffic coming from the ZyWALL itself.
To Use the To field to specify the zone to which the traffic is going.
Select ZyWALL to specify traffic destined for the ZyWALL itself.
From LAN1 To LAN1 means packets traveling from a computer on one LAN
subnet to a computer on another LAN subnet via the ZyWALL’s LAN zone
interfaces. The ZyWALL does not check packets traveling from a LAN
computer to another LAN computer on the same subnet.
From WAN To WAN means packets that come in from the WAN zone and the
ZyWALL routes back out through the WAN zone.
ADP Profile An ADP profile is a set of ADP rules with configured activation, log and action
settings. Select an ADP profile to apply to the entry’s traffic direction. Configure
the ADP profiles in the ADP profile screens.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving your changes.