User's Manual

Chapter 4 Wizard Setup
ZyWALL USG 100/200 Series User’s Guide
87
The ZyWALL applies the configuration settings.
Figure 26 PPTP Encapsulation: Auto: Finish
You have set up your ZyWALL to access the Internet.
" If you have not already done so, you can register your ZyWALL with
myZyXEL.com and activate trials of services like IDP.
You can click Next and use the following screen to perform a basic registration (see Section
4.4 on page 91). If you want to do a more detailed registration or manage your account details,
click myZyXEL.com.
Alternatively, click Close to exit the wizard.
Zone This field displays to which security zone this interface and Internet connection
will belong.
IP Address Enter your WAN IP address in this field.
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
computer before you can access it. The ZyWALL uses a system DNS server (in the order you specify
here) to resolve domain names for VPN, DDNS and the time server.
First DNS Server
Second DNS
Server
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a machine in order
to access it.
Next Click Next to continue.
Table 11 PPTP Encapsulation: Auto (continued)
LABEL DESCRIPTION