User's Manual

Prestige 100L IDSL Router
Hardware Installation and Initial Setup 2-5
Table 2-2 Main Menu Commands
OPERATION KEYSTROKES DESCRIPTION
Move down to
another menu
[Enter] key To move forward to a submenu, type in the number of the
desired submenu and press the [Enter] key.
Move up to a
previous menu
[Esc] key Press the [Esc] key to move back to the previous menu.
Move to a
“hidden” menu
Press [space bar]
to change No to
Yes then press
the [Enter] key
Fields beginning with “Edit” lead to hidden menus and have a
default setting of No. Press [space bar] to change No to Yes,
then press the [Enter] key to go to a “hidden” menu.
Move the cursor
[Enter] key or
[Up]/[Down] arrow
keys
Within a menu, press the [Enter] key to move to the next field.
You can also use the [Up]/[Down] arrow keys to move to the
previous and the next field, respectively.
Enter information Fill in, or
Press [space bar]
to toggle
You need to fill in two types of fields. The first requires you to
type in the appropriate information. The second allows you to
cycle through the available choices by pressing [space bar].
Required fields
<?>
All fields with the symbol <?> must be filled in order to be able to
save the new configuration.
N/A fields <N/A> Some of the fields in the SMT shows <N/A>. This symbol refers
to an option that is Not Applicable.
Save your
configuration
[Enter] key Save your configuration by pressing the [Enter] key at the
message [Press ENTER to confirm or ESC to cancel]. Saving
the data on the screen takes you, in most cases to the previous
menu.
Exit the SMT
Type 99, then
press the [Enter]
key.
Type “99” at the Main Menu prompt and press the [Enter] key to
exit the SMT interface.
2.5.1 Main Menu
After you enter the password, the SMT displays the Prestige 100L Main Menu, as shown in the following
figure.