User's Manual

Prestige 100L IDSL Router
System Information 10-3
The following table describes the fields present in Menu 24.1 – System Maintenance – Status. It should
be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Table 10-1 System Maintenance – Status Menu Fields
FIELD
DESCRIPTION
Chan
Shows the statistics for logical channels.
Link
Shows the Remote Node the channel is currently connected to or the
status of the channel (Idle, Calling, or Answering).
Type
Shows the current connecting speed (64K or 128K).
TXPkts
Shows the number of transmitted packets on this channel.
RXPkts
Shows the number of received packets on this channel.
Errors
Shows the number of error packets on this channel.
CLU (Current Line Utilization)
Shows the percentage of current bandwidth used on this channel.
ALU (Average Line
Utilization)
Shows the average CLU for this channel.
Up Time
Shows the time this channel has been connected to the current Remote
Node.
Total Up Time
Shows the total time this channel has been connected to the current
Remote Node.
CPU Load Specifies the percentage of CPU utilization.
Ethernet Shows the current status of the LAN connection on your Prestige.
Status Shows the current status of the LAN that is 10M/Half Duplex. Left hand
side of the “/” is the speed of the Ethernet and the right hand side is the
mode of the Ethernet.
TX Pkts
Shows the number of transmitted packets to LAN.
RX Pkts
Shows the number of received packets from LAN.
Collisions Shows the number of collisions.
WAN
IP Address Shows the IP address of the current channel.