User's Manual

Prestige 100L IDSL Router

Transferring Files 11-7

The following table describes some of the fields that you may see in third party FTP clients.

Table 11-2 Third Party FTP Clients

HOST ADDRESS ENTER THE ADDRESS OF THE HOST SERVER.

• Anonymous.

This is when a user I.D. and password is automatically supplied to the server

for anonymous access. Anonymous logins works only if your ISP or service

administrator has enabled this option.

• Normal.

The server requires a unique User ID and Password to login.

Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.

Initial Remote Directory Specify the default remote directory (path).

Initial Local Directory Specify the default local directory (path).

The following is an example tftp command:

TFTP [-i] host put p100l.bin ras

where “i” specifies binary image transfer mode (use this mode when transferring binary files), “host” is the

Prestige IP address, “put” transfers the file source on the workstation (p100l.bin – name of the firmware on

the workstation) to the file destination on the remote host (ras – name of the firmware on the Prestige).

The following table describes some of the fields that you may see in third party TFTP clients.

Table 11-3 Third Party TFTP Clients – General Fields

Host Enter the IP address of the Prestige. 192.168.1.1 is the Prestige default IP address when

shipped.

Send/Fetch

Press Send to upload the file to the Prestige and Fetch to back up the file on your

computer.

Local File Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom

extension) on your computer.

Remote File

This is the filename on the Prestige. The filename for the firmware is ras and for the

configuration file, is rom-0.

Binary Transfer the file in binary mode.

Abort Stop transfer of the file.