User's Manual

P-2301/2R-P1C / P-2301RL-P1C User’s Guide
28
Make sure the power source is turned on.
If the problem continues, contact your vendor.
V The POWER light is red.
Unplug the device, and plug it in again.
If the problem continues, contact your vendor.
V I can open the web browser, but I cannot see
the Login screen.
Make sure your web browser meets the requirements identified
in section 2.
Check the connection between your computer and the ZyXEL
Device. See section 3.
Make sure your computer’s IP address is in the same subnet as
the ZyXEL Device’s IP address.
• If your ZyXEL Device is in Router mode, let the ZyXEL
Device assign an IP address to your computer. See Setting
Up Your Computer’s IP Address on page 31.
• If your ZyXEL Device is in Bridge mode, set up a static IP
address for your computer. For example, if you set the
Management IP Address to 192.168.5.1, set up a static IP
address in the range 192.168.5.2 ~ 192.168.5.254 on your
computer (see section 6.2 on page 31). When you finish, set
up the original settings again.