User's Manual

31
P-2301/2R-P1C / P-2301RL-P1C User’s Guide
6.1 Resetting the ZyXEL Device
This changes all the ZyXEL Device’s settings to their original
values. You have to make all of your changes again. See section
1 on page 2 for information on default settings.
"Make a note of your settings before you reset
the ZyXEL Device.
To reset the ZyXEL Device,
1 Press the RESET button until the POWER light starts to
blink. (This usually takes ten seconds or less.)
2 Release the RESET button.
6.2 Setting Up Your Computer’s IP Address
"Follow these instructions only if you are
following a suggestion in Troubleshooting.
This section shows you how to set up your computer to
automatically get an IP address from the ZyXEL Device.
6.2.1 Windows NT/2000/XP
1 In Windows XP, click Start > Control Panel.
In Windows 2000/NT, click Start > Settings > Control
Panel.