User's Manual

Chapter 48 Syslog
XGS-4526/4528F/4728F User’s Guide
431
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE Bias Under Alarm Low
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE Bias Under Warn Low
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE TxPower Over Alarm High
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE TxPower Over Warn High
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE TxPower Under Alarm Low
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE TxPower Under Warn Low
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE RxPower Over Alarm High
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE RxPower Over Warn High
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE RxPower Under Alarm Low
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE RxPower Under Warn Low
Threshold(<threshold>) On Port
<port>, Current Value : <value>
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE Abnormal temperature state at port
<port> has been cleared
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE Abnormal voltage state at port <port>
has been cleared
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE Abnormal TX bias state at port <port>
has been cleared
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE Abnormal TX power state at port
<port> has been cleared
SP_SYSLOG_TYPE_INTE
RFACE
SYSLOG_NOTICE Abnormal RX power state at port
<port> has been cleared
SP_SYSLOG_TYPE_SWIT
CH
SYSLOG_ALERT System has reset without management
command
SP_SYSLOG_TYPE_SWIT
CH
SYSLOG_ALERT Another image was booted
SP_SYSLOG_TYPE_SWIT
CH
SYSLOG_CRITICAL <1.2VIN | 1.8VIN | 3.3VIN | 2.5VIN>
voltage value <value> is lower than its
limit voltage value
Table 161 Syslog Messages
LOG TYPE SEVERITY MESSAGE