User manual

Chapter 1 Introduction
LTE4506 User’s Guide
11
Figure 3 The Wi-Fi Sharing Button
1.8 Resetting the LTE4506
If you forget your password or IP address, or you cannot access the Web Configurator, you will need to
use the physical Reset button to reload the factory-default configuration file. This means that you will
lose all configurations that you had previously saved, the password will be reset to 1234 and the IP
address will be reset to 192.168.1.1.
1.8.1 How to Use the Physical Reset Button
1 Make sure the LTE4506 is turned on.
2 Press the Reset button at the bottom of the LTE4506 until it reboots and set it back to the factory-default
configurations.