User manual

Chapter 4 Internet
LTE4506 User’s Guide
26
4.2 Internet Status Screen
Use this screen to change your LTE4506’s Internet access settings. Click Internet > Internet Status. The
screen appears as shown next.
Figure 14 Internet > Internet Status
The following table describes the labels in this screen.
Table 11 Internet > Internet Status
LABEL DESCRIPTION
Internet Status
Network
Provider
This shows the name of the service provider for the mobile network to which the LTE4506 is
connected.
Internet Status This shows the mobile data connection status.
IP Address (IPv4) This field displays the current IPv4 address assigned to the WAN interface.
IP Address (IPv6) This field displays the current IPv6 address assigned to the WAN interface.
Signal Level This shows the current signal strength to the mobile network in dBm.
Network Type This shows the type of the mobile network (such as LTE, UMTS, GSM, HSPA+, etc.) to which the
LTE4506 is connecting.
Connection
Time
This field displays how long you connect to the Internet through IPv4.
Internet Settings
Allow Data
Roaming
Select this check box to enable data roaming on the LTE4506.
4G roaming is to use your mobile device in an area which is not covered by your service
provider. Enable roaming to ensure that your LTE4506 is kept connected to the Internet when
you are traveling outside the geographical coverage area of the network to which you are
registered.