User manual

Chapter 4 Internet

LTE4506 User’s Guide

4.3 PIN Settings Screen

Use this screen to turn on or turn off PIN code authentication on the inserted SIM card. Click Internet >

PIN Settings. The screen appears as shown next.

Figure 15 Internet > PIN Settings

The following table describes the labels in this screen.

Cellular Network

Mode

Select the type of the network (4G Mode, 3G Mode, or 2G Mode) to which you want the LTE4506

to connect and click Apply to save your settings.

Otherwise, select Auto to have the LTE4506 connect to an available network using the default

settings on the SIM card. If the currently registered mobile network is not available or the mobile

network’s signal strength is too low, the LTE4506 switches to another available mobile network.

Internet

Connection

Method

Select Always to connect to the mobile network automatically if there is an available mobile

network. Select On Demand to connect to the mobile network automatically only when a

connected client wants to access the Internet. Otherwise, select Manual.

Disconnect in Specifies the period of time the user can be idle before he/she is disconnected.

Apply Click Apply to save your changes back to the LTE4506.

Reset Click Reset to reload the previous configuration for this screen.

Table 11 Internet > Internet Status (continued)

LABEL DESCRIPTION

Table 12 Internet > PIN Settings

LABEL DESCRIPTION

PIN Protection

Enable PIN

Protection

Click On to turn on PIN code authentication. Otherwise, click Off to turn off PIN code

authentication.

A PIN (Personal Identification Number) code is a key to a SIM card. Without the PIN code, you

cannot use the SIM card.

Change PIN Code