User manual

Chapter 5 Wi-Fi
LTE4506 User’s Guide
37
Use this screen to view your LTE4506’s MAC filter settings and add new MAC filter rules. Click Wi-Fi > MAC
Filter. The screen appears as shown.
Figure 22 Wi-Fi > MAC Filter
The following table describes the labels in this screen.
Table 18 Wi-Fi > MAC Filter
LABEL DESCRIPTION
SSID 1/ SSID 2 Select SSID 1 (or SSID 2) to configure the MAC filtering rules.
Enable MAC
Filter of SSID 1
(or SSID 2)
Select Enable MAC Filter of SSID 1 (or SSID 2) to prohibit devices with the MAC addresses you
configured.
Blacklist This field displays how many entries you display on this page.
Add New Click Add New to create a new entry.
Delete All Click Delete All to remove all entries.
This field displays the index number of the MAC address entry.
MAC Address This field displays the MAC addresses of the wireless devices that are allowed or denied access
to the LTE4506.
Click Add New or Edit to enter or change the MAC address of the wireless devices that are
allowed or denied access to the LTE4506 in this field. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Description This field displays the name of the MAC address entry.
Click Add New or Edit to enter a descriptive name to identify the MAC address entry. You can
enter up to 20 printable ASCII characters. Spaces are allowed.
Action Click Edit to go to the screen where you can edit the rule.
Click Delete to remove the MAC address entry.
Apply Click Apply to save your changes back to the LTE4506.
Reset Click Reset to reload the previous configuration for this screen.