User manual

Chapter 5 Wi-Fi

LTE4506 User’s Guide

5.5 WPS Screen

Use this screen to configure Wi-Fi Protected Setup (WPS) on your LTE4506.

WPS allows you to quickly set up a wireless network with strong security, without having to configure

security settings manually. Set up each WPS connection between two devices. Both devices must

support WPS. See Section 5.6.5.3 on page 45 for more information about WPS.

Note: To use the WPS feature, make sure you have wireless enabled in the Wi-Fi > Wi-Fi

Settings screen.

Note: If you want to use the WPS feature set the security type to WPA or None.

Click Wi-Fi > WPS. The following screen displays.

Figure 23 Wi-Fi > WPS

The following table describes the labels in this screen.

Table 19 Wi-Fi > WPS

LABEL DESCRIPTION

Select WPS

Interface

Select SSID 1 (or SSID 2) to configure WPS.

Select WPS

Method

• Select PBC to set up a WPS wireless network using Push Button Configuration (PBC).

If you select PBC, click Activate to add another WPS-enabled wireless device (within wireless

range of the LTE4506) to your wireless network. This button may either be a physical button on

the outside of device, or a menu button similar to the Connect button on this screen.

Note: You must press the other wireless device’s WPS button within two minutes of

pressing this button.

• Select PIN to set up a WPS wireless network by entering the PIN of the client into the LTE4506.

WPS PIN This field is available only when you set Select WPS Method to PIN.

Select this option and enter the PIN of the device that you are setting up a WPS connection with

and click Apply to authenticate and add the wireless device to your wireless network.

You can find the PIN either on the outside of the device, or by checking the device’s settings.

Note: You must also activate WPS on that device within two minutes to have it

present its PIN to the LTE4506.