User manual

LTE4506 User’s Guide
50
CHAPTER 6
Router
6.1 Overview
This chapter describes how you can configure the management IP address, DHCP settings of your
LTE4506, the IP filtering and content filtering settings.
The Internet Protocol (IP) address identifies a device on a network. Every networking device (including
computers, servers, routers, printers, etc.) needs an IP address to communicate across the network.
These networking devices are also known as hosts.
6.1.1 What You Can Do in this Chapter
• Use the LAN IP screen to configure the LTE4506’s LAN IP address (Section 6.2 on page 50).
• Use the DHCP Server screen to enable the DHCP server on the LTE4506 (Section 6.3 on page 51).
• Use the DNS Settings screen to configure the LTE4506’s DNS settings (Section 6.4 on page 53).
• Use the Connected Devices screen to view current clients information (Section 6.5 on page 53).
• Use the IPv4/Port Filter screen to view and configure IPv4/Port filtering rules (Section 6.6 on page 54).
• Use the IPv6/Port Filter screen to view and configure IPv6/Port filtering rules (Section 6.7 on page 55).
• Use the URL Filter screen to view and configure content filtering rules (Section 6.8 on page 56).
• Use the IP/Port Forwarding screen to view and configure port forwarding rules (Section 6.9 on page
57).
6.2 LAN IP Screen
Use this screen to view or configure the management IP address for your LTE4506. To access this screen,
click Router > LAN IP.
Note: If you change the LTE4506’s IP address, you need to use the new IP address to access
the LTE4506’s web configurator.