User manual

Chapter 6 Router
LTE4506 User’s Guide
52
Figure 31 Router > DHCP Server
The following table describes the labels in this screen.
Table 23 Router > DHCP Server
LABEL DESCRIPTION
DHCP Settings
Enable DHCP Server Select the check box to enable the DHCP server on the LTE4506.
Start IP The LTE4506 is pre-configured with a pool of 240 IP addresses starting from 192.168.0.10 to
192.168.0.250.
This field specifies the first of the contiguous addresses in the IP address pool.
End IP This field specifies the last of the contiguous addresses in the IP address pool.
Lease Time (minutes) Specify how long (in minutes) each computer can use the information (especially the IP
address) before it has to request the information again.
Static DHCP List
Add New Click Add New to create a new entry.
This field displays the index number of the static IP address entry.
IP Address This field displays the IP address that the LTE4506 assigns to a device with the entry’s MAC
address.
MAC Address This field displays the MAC address of the device to which the LTE4506 assigns the entry’s IP
address.
Action Click Edit to go to the screen where you can edit the static IP address.
Click Delete to remove the static IP address entry.
Apply Click this button to save your changes back to the LTE4506.
Reset Click Reset to reload the previous configuration for this screen.