User manual

Chapter 6 Router
LTE4506 User’s Guide
56
6.8 URL Filter Screen
Use this screen to block the users on your network from accessing certain web sites. To access this
screen, click Router > Firewall > URL Filter.
IPv6/Port
Filtering Policy
Select Whitelist to allow packets that match the filtering rules defined on this screen to pass
through. Select Blacklist to block packets that match the filtering rules defined on this screen.
IPv6/Port Filter List
Add New Click Add New to create a new rule.
This field displays the rule index number.
Source IP This field displays the source IPv6 addresses to which this rule applies.
Port This field displays a single port number of the source or a port range.
Enter the port number/range of the source that define the traffic type, for example TCP port 80
defines web traffic.
Protocol This field displays the protocol (TCP, UDP, TCP+UDP or any) used to transport the packets for
which you want to apply the rule.
Dest. IP This field displays the destination IPv6 addresses to which this rule applies.
Port This field displays a single port number of the destination or a port range.
Enter the port number/range of the destination that define the traffic type, for example TCP port
80 defines web traffic.
Comment Enter descriptions of the rule in this field.
Action Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Apply Click this button to save your changes back to the LTE4506.
Reset Click Reset to reload the previous configuration for this screen.
Table 27 Router > Firewall > IPv6/Port Filter
LABEL DESCRIPTION