User manual

Chapter 8 System
LTE4506 User’s Guide
70
The following table describes the labels in this screen.
8.4.3 Import & Export Settings Profile
This screen allows you to upload a new or previously saved configuration file from your computer to your
LTE4506.
Type in the location of the file you want to upload in the Apply Profile from File field or click Choose File
to find it. Click Apply to begin the upload process. The LTE4506 automatically restarts.
Do not turn off the LTE4506 while configuration file upload is in progress.
Backup Configuration allows you to back up (save) the LTE4506’s current configuration to a file on your
computer. The configuration file should be saved and edited in UTF-8 (without BOM) format, if you’re
using Windows Notepad, make sure you choose File > Save as UTF-8 in the text editor. Once your
LTE4506 is configured and functioning properly, it is highly recommended that you back up your
configuration file before making configuration changes. The backup configuration file will be useful in
case you need to return to your previous settings.
Select one profile from the drop-down list box in the Export Profile to File field, and click Export to save
the LTE4506’s current configuration to your computer.
After the LTE4506 configuration has been restored successfully, the login screen appears. If you
uploaded the default configuration file you may need to change the IP address of your computer to be
in the same subnet as that of the default device IP address (192.168.1.1).
8.5 Firmware Upgrade Screen
This screen allows you to upload new firmware to your LTE4506. You can download new firmware
releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your device’s
performance.
Only use firmware for your device’s specific model.
To access this screen, click System > Firmware Upgrade. This screen displays the current firmware version
and status of the LTE4506. Type in the location of the file you want to upload in the Select Firmware File
field or click Choose File to find it. Remember that you must decompress compressed (.ZIP) files before
you can upload them. You can select the check box to return the LTE4506 to its factory defaults after
upgrading the new firmware. Click Apply to begin the upload process.
Table 39 System > Settings Profile
LABEL DESCRIPTION
This field displays the index number of the profile.
Profile Name This field displays the profile name you specified in the New Profile Name field.
Saved Date This field displays the saved time and date of the profile.
Action Click Apply to use the configuration to the LTE4506.
Click Delete to go to the screen where you can remove the profile.