User`s guide

P-793H v2 Support Notes
Step 5: To upload the P-793H v2configuration, please save the remote file
as 'rom-0' in the P-793H v2.
An example:
 The 192.168.1.1 is the IP address of the P-793H v2.
 The local file is the source file of your configuration file that is available
in your hard disk.
 The remote file is the file name that will be saved in P-793H v2.
 Check the port number 69 and 512-Octet blocks for TFTP.
 Check 'Binary' mode for file transfering.
 Using TFTP command on Windows NT
Step 1: TELNET to your P-793H v2 first before using TFTP command
Step 2: Type the CI command 'sys stdio 0' to disable console idle timeout in
Command Line Interface (CLI).
Step 3: Download ZyNOS via LAN : c:\tftp -i [P-793H v2IP] get ras [localfile]
Step 4: Upload P-793H v2 configurations via LAN: c:\tftp -i [P-793H v2 IP] put
[localfile]
rom-0
Step 5: Download P-793H v2 configurations via LAN: c:\tftp -i [P-793H v2 IP] get
rom-0
[localfile]
 Using TFTP command on UNIX
Before you begin:
1. TELNET to your P-793H v2 first before using TFTP command
All contents copy right © 2010 Zy XEL Communications Corporation.
105