User`s guide

P-793H v2 Support Notes

Step 5 Use 'put' command to transfer the file to the P-793H v2.

Example:

Step 1: Connect to the P-793H v2 by entering the P-793H v2's IP and

Administrator password in the FTP software. Set the transfer type to 'Auto-

Detect' or 'Binary'.

Step 2: Press 'OK' to ignore the 'Username' prompt.

Step 3: To upload the firmware file, we transfer the local 'ras' file to overwrite

the remote 'ras' file.

To upload the configuration file, we transfer the local 'rom-0' to overwrite

107