User`s guide

P-793H v2 Support Notes
The Point-to-Point Protocol (PPP) Link Control Protocol (LCP) Callback
Configuration Option contains an 8-bit Operations field which identifies the
format of the Message. These are assigned as follows:
Operation Description
----------------------------------------------------------------------------------
0 Location determined by user authentication.
1 Dialing string.
2 Location identifier.
3 E.164 number.
4 X.500 distinguished name.
5 unassigned
6 Location is determined during CBCP negotiation.
 PPP IPCP CONFIGURATION OPTION TYPES
The Point-to-Point Protocol (PPP) Internet Protocol Control Protocol (IPCP)
specifies a number of Configuration Options which are distinguished by an 8
bit Type field. These Types are assigned as follows:
Type Configuration Option
---------------------------------------------------------------------------------
1 IP-Addresses (deprecated) [RFC1332]
2 IP-Compression-Protocol [RFC1332]
3 IP-Address [RFC1332]
4 Mobile-IPv4 [RFC2290]
129 Primary DNS Server Address [RFC1877]
130 Primary NBNS Server Address [RFC1877]
131 Secondary DNS Server Address [RFC1877]
132 Secondary NBNS Server Address [RFC1877]
 PPP ATCP CONFIGURATION OPTION TYPES
The Point-to-Point Protocol (PPP) Apple Talk Control Protocol (ATCP)
specifies a number of Configuration Options [RFC-1378] which are
distinguished by an 8 bit Type field. These Types are assigned as follows:
Type Configuration Option
---------------------------------------------------------------------
1 AppleTalk-Address
2 Routing-Protocol
3 Suppress-Broadcasts
All contents copy right © 2010 Zy XEL Communications Corporation.
118