User`s guide

P-793H v2 Support Notes
6 MAC-Address
7 Spanning-Tree-Protocol
 PPP BRIDGING MAC TYPES
The Point-to-Point Protocol (PPP) Bridging Control Protocol (BCP) contains an
8 bit MAC Type field which identifies the MAC encapsulated. These Types are
assigned as follows:
Type MAC
--------------------------------------------------------------------------------
0 Reserved
1 IEEE 802.3/Ethernet with cannonical addresses
2 IEEE 802.4 with cannonical addresses
3 IEEE 802.5 with non-cannonical addresses
4 FDDI with non-cannonical addresses
5-10 reserved
11 IEEE 802.5 with cannonical addresses
12 FDDI with cannonical addresses
 PPP BRIDGING SPANNING TREE
The Point-to-Point Protocol (PPP) Bridging Control Protocol (BCP) Spanning
Tree Configuration Option contains an 8-bit Protocol field which identifies the
spanning tree used. These are assigned as follows:
Protocol Spanning Tree
------------------------------------------------------------------------------------
0 Null - no spanning tree protocol supported
1 IEEE 802.1D spanning tree protocol
2 IEEE 802.1G extended spanning tree protocol
3 IBM source route spanning tree protocol
4 DEC LANbridge 100 spanning tree protocol
 PPP INTERNETWORK PACKET EXCHANGE CONTROL PROTOCOL
(IPXCP)
IPXCP CONFIGURATION OPTIONS
Option Description Reference
----------------------------------------------------------------------------------
1 IPX-Network-Number [RFC1552]
All contents copy right © 2010 Zy XEL Communications Corporation.
120