User`s guide

P-793H v2 Support Notes
 Setup the P-793H v2 as a DHCP Relay
We could set the P-793H v2 as a DHCP Relay via menu 3.2 as below:
Or via the following command in CLI:
Ip dhcp enif0 mode relay
Ip dhcp enif0 relay server [Server IP Address]
8. SUA Notes
Tested SUA/NAT Applications (e.g., Cu-SeeMe, ICQ, NetMeeting)
46
All contents copy right © 2010 Zy XEL Communications Corporation.