User`s guide

P-793H v2 Support Notes

The SNMP related settings in P-793H v2are configured in Web Configurator,

Advanced Setup, Advanced -> Remote MGNT -> SNMP The following steps

describe a simple setup procedure for configuring all SNMP settings.

Key Settings:

Option

Descriptions

Get

Community

Enter the correct Get Community. This Get Community must match the

'Get-' and 'GetNext' community requested from the NMS. The default is

'public'.

Set

Community

Enter the correct Set Community. This Set Community must match the

'Set-community requested from the NMS. The default is 'public'.

Trusted

Host

Enter the IP address of the NMS. The P-793H v2w ill only respond to

SNMP messages coming from this IP address. If 0.0.0.0 is entered, the

P-793H v2 will respond to all NMS managers.

Trap

Community

Enter the community name in each sent trap to the NMS. This Trap

Community must match w hat the NMS is expecting. The default is

'public'.