User`s guide

P-793H v2 Support Notes
Key Settings:
Active
Check the box to enable BWM on the interface. Note that if you w ould like
to manage traffic from WAN to LAN, you should apply BWM on LAN
interface.
Speed
Enter the total speed to manage on this interface. This value is the budget
of the class tree's root.
Scheduler
Choose the principle to allocate bandw idth on this interface.
Priority-Based allocates bandw idth via priority. Fairness-Based allocates
bandw idth by ratio.
Maximize
Bandwidth
Usage
Check this box if you would like to give residuary bandw idth from Interface
to the classes w ho need more bandw idth than configured amount. Do not
select this if you w ant to reserve bandw idth for traffic that does not match a
bandw idth class or you w ant to limit the bandw idth of each class at the
configured value. (Please note that to meat the second condition, you
should also disable Use All Managed Bandwidth in the BWM rule.)
Step 2: Go to Web Configurator, Advanced Setup, Advanced -> Bandwidth
MGMT-> Rule Setup, select the interface, Service, Priority, and Allocated
Bandwidth for this rule, then click button „Add‟ to apply this rule.
Step 3: You can modify the rule by clicking the button „Edit‟ on the rule:
77
All contents copy right © 2010 Zy XEL Communications Corporation.