User`s guide

P-793H v2 Support Notes

Solution 1:

Step 1: In Prestige A, please register a DDNS account from

http://www.dyndns.org or http://dynupdate.no-ip.com

Setp 2: Enable DynDNS function on Prestige A via Web configurator,

Advanced -> Dynamic DNS. And in VPN settings on Prestige A, please

specify the IP address of My IP as 0.0.0.0 and Secure Gateway as 0.0.0.0

(Here we take P-793H v2 Web Configurator as the example).

Step 3: In Prestige B, please specify the IP address of My IP as 0.0.0.0 and

Secure Gateway as the domain name you registered for Prestige A.

Step 4: Please always initiate VPN tunnel from Prestige B on which Secure

Gateway is configured as dynamic domain name.

Solution 2:

Step 1: Register DynDNS account from http://www.dyndns.org or

http://dynupdate.no-ip.com for both PrestigeA & PrestigeB.

Step 2: In PrestigeA, configure My IP as 0.0.0.0 and Secure Gateway as the

dynamic domain name of PrestigeB.

Step 3: In PrestigeB, configure My IP as 0.0.0.0 and Secure Gateway as the

dynamic domain name of PrestigeA.

Step 4: You can initiate VPN tunnel from PrestigeA or PrestigeB by this

solution.

(2) Prestige v.s. 3rd Party

This is highly dependent on which kind of 3rd party you use. Generally

speaking, this 3rd party VPN solution must support either of the two items:



Support DDNS for update of its dynamic WAN IP. (If Prestige is to be

the VPN initiator)



Support Secure Gateway can be configured by Domain Name. (If

Prestige is to be the VPN responder)

3. Configure NAT for internal servers

Some tips for this application: