User's Manual

ZyXEL AG-320 User’s Guide
26 Chapter 1 Getting Started
1.2.2 Access Point Mode
You can also set the AG-320 to access point mode. In access point mode, your AG-320 allows
you to set up your wireless networks without using a dedicated AP. The following figure
shows a network example.
Figure 4 Application: Access Point Mode
In the example, the AG-320 is installed on computer A and set to operate in access point
mode. Computer A provides an Internet connection to the wireless LAN, so wireless stations
B and C can access the Internet.
Note: With WZC, you cannot use the AG-320 as an access point.
1.2.3 Changing AG-320 Mode
To change between the modes, select either Station Mode or AP Mode in any ZyXEL utility
screens.
Figure 5 ZyXEL Utility: Change Modes
Note: Wait for about five seconds for the ZyXEL utility to complete the mode change.