User's Manual

ZyXEL AG-320 User’s Guide
Chapter 4 Wireless Station Mode Configuration 51
4.3.1.2 WPA-PSK/WPA2-PSK
Figure 28 Station Mode: Security Setting: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
4.3.1.3 WPA/WPA2
Figure 29 Station Mode: Security Setting: WPA/WPA2
Table 9 Station Mode: Security Setting: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Encryption Type The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to Section 3.2.3.3 on page 40 for more information.
Pre-Shared Key Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal
characters.
Back Click Back to go to the Site Survey screen to select and connect to another
network.
Next Click Next to confirm your selections and advance to the Confirm New Settings
screen. Refer to Section 4.3.2 on page 53.
Exit Click Exit to return to the Site Survey screen without saving.