User's Manual

ZyXEL AG-320 User’s Guide
Chapter 4 Wireless Station Mode Configuration 57
• If you select the Infrastructure network type in the previous screen, skip to step 3. If you
select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and click Next to continue.
Note: To associate to an ad-hoc network, you must use the same channel as the peer
computer.
Figure 34 Station Mode: Profile: Select a Channel
The following table describes the labels in this screen.
, denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
, denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
or denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security
is deactivated.
SSID This field displays the SSID (Service Set IDentifier) of each AP or peer device.
Scan Click Scan to search for available wireless devices within transmission range.
Select Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the AG-320 associates to the selected wireless
network only.
Table 15 Station Mode: Profile: Select a Channel
LABEL DESCRIPTION
Wireless Settings
Channel Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Table 14 Station Mode: Profile: Add a New Profile (continued)
LABEL DESCRIPTION