User's Manual
ZyXEL AG-320 User’s Guide
Chapter 5 Access Point Mode Configuration 63
CHAPTER 5
Access Point Mode
Configuration
This chapter shows you how to configure your AG-320 in access point mode.
5.1 Access Point Mode Introduction
To set your AG-320 as an Access Point (AP), select AP Mode in any utility screen (refer to
Section 1.2.3 on page 26).
In access point mode, your AG-320 functions as an access point. This allows you to set up
your wireless networks without using a dedicated AP.
5.1.1 ZyXEL Utility Screen Summary
This section describes the ZyXEL utility screens when the AG-320 is in AP mode.
Figure 41 ZyXEL Utility Menu Summary: AP Mode
The following table describes the menus.
Table 17 ZyXEL Utility Menu Summary: AP Mode
TAB DESCRIPTION
AP Mode
Link Info Use this screen to see your current connection status, configuration and data rate
statistics.
Configuration Use this screen to configure wireless LAN settings.
Advanced Use this screen to configure the wireless LAN mode.
MAC Filter Use this screen to configure which computer(s) you want access to the wireless
LAN through the AG-320.