User's Manual

ZyXEL AG-320 User’s Guide
Chapter 5 Access Point Mode Configuration 65
5.3 The Configuration Screen
Click Configuration in the ZyXEL utility screen to display the screen as shown.
Figure 43 Access Point Mode: Configuration
The following table describes the labels in this screen.
Association List This table lists up to 16 wireless clients that are currently connected to the AG-320.
or denotes a wireless client without WEP security.
denotes a wireless client with WEP security enabled.
MAC Address This field displays the MAC addresses of a wireless client that is currently
connected to the AG-320.
Refresh Click Refresh to update this screen.
Table 18 Access Point Mode: Link Info (continued)
LABEL DESCRIPTION
Table 19 Access Point Mode: Configuration
LABEL DESCRIPTION
Wireless Settings
SSID The SSID identifies the wireless network to which a wireless station is associated.
Wireless stations associating to the access point (the AG-320) must have the
same SSID.
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
Hide SSID Select this check box to hide the SSID so an intruder cannot obtain the SSID
through scanning using a site survey tool.
Channel Set the operating frequency/channel depending on your geographical region.