User's Manual

Chapter 3 The Web Configurator
NBG-510S User’s Guide
38
In the Old Password field, enter the current password. Enter the new password (up to 31
printable ASCII characters with no spaces allowed) in the New Password and the Re-type to
Confirm fields. Click OK to save the changes.
3.6 Device Reset
You can reset the ZyXEL Device using the RESET button. You need to reset your ZyXEL
Device to the factory default settings if
• you have changed the default administrator login password and have now forgotten it.
or
• you want to start configuring the ZyXEL Device again from the default settings.
" Resetting your device back to the defaults erases all your custom settings.
Follow the steps below to reset the ZyXEL Device using the RESET button panel.
1 Make sure the PWR LED is on and not blinking.
2 Use a pointed object to press the RESET button in for five seconds and release it. The
device restarts with the factory default settings (the default LAN IP address is
192.168.1.1 and the administrator login password is 1234).
3 Wait until the device finished rebooting before accessing the web configurator again.