User's Manual

P-660H/HW/W-T Series User’ Guide
431 Appendix M
Some parameters are dependent on others. For example, if you disable the Configured field in
menu 1 (see Figure 269 on page 430), then you disable every field in this menu.
If you enter a parameter that is invalid in the Input column, the Prestige will not save the
configuration and the command line will display the Field Identification Number. Figure 270
on page 431, shown next, is an example of what the Prestige displays if you enter a value other
than “0” or “1” in the Input column of Field Identification Number 1000000 (refer to Figure
269 on page 430).
Figure 270 Invalid Parameter Entered: Command Line Example
The Prestige will display the following if you enter parameter(s) that are valid.
Figure 271 Valid Parameter Entered: Command Line Example
Internal SPTGEN FTP Download Example
1 Launch your FTP application.
2 Enter "
bin". The command “bin” sets the transfer mode to binary.
3 Get "
rom-t" file. The command “get” transfers files from the Prestige to your computer.
The name “
rom-t” is the configuration filename on the Prestige.
4 Edit the "
rom-t" file using a text editor (do not use a word processor). You must leave
this FTP screen to edit.
field value is not legal error:-1
ROM-t is not saved, error Line ID:10000000
reboot to get the original configuration
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
Please wait for the system to write SPT text file(ROM-t)...
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2