User's Manual

Chapter 6 WAN Setup
AMG1202-T10A User’s Guide
75
differs by the encapsulation you select. When you use the WAN > Internet Access Setup screen
to set up Internet access, you are configuring the first WAN connection.
Figure 32 Network > WAN > More Connections
The following table describes the labels in this screen.
Table 18 Network > WAN > More Connections
LABEL DESCRIPTION
# This is an index number indicating the number of the corresponding connection.
Active This field indicates whether the connection is active or not.
Clear the check box to disable the connection. Select the check box to enable it.
Name This is the name you gave to the Internet connection.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Channel Identifier
(VCI) numbers configured for this WAN connection.
Encapsulation This field indicates the encapsulation method of the Internet connection.
Modify The first (ISP) connection is read-only in this screen. Use the WAN > Internet
Access Setup screen to edit it.
Click the Edit icon to edit the Internet connection settings. Click this icon on an
empty configuration to add a new Internet access setup.
Click the Remove icon to delete the Internet access setup from your connection
list.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.