User's Manual

Chapter 7 Tutorials
ZyWALL USG 20/20W User’s Guide
114
1 Click Configuration > Network > Interface > Ethernet and double-click the
wan1 entry. Enter the available bandwidth (1000 kbps) in the Egress
Bandwidth field. Click OK.
Figure 63 Configuration > Network > Interface > Ethernet > Edit (wan1)
2 Go to Configuration > Network > Interface > Cellular. Double-click the
cellular1 entry and set the egress bandwidth for cellular1 to 512 Kbps.
7.3.2 Configure the WAN Trunk
1 Click Configuration > Network > Interface > Trunk. Click the Add icon.