User's Manual

Chapter 36 Schedules
ZyWALL USG 20/20W User’s Guide
568
Finding Out More
• See Section 6.6 on page 103 for related information on these screens.
• See Section 43.4 on page 631 for information about the ZyWALL’s current date
and time.
36.2 The Schedule Summary Screen
The Schedule summary screen provides a summary of all schedules in the
ZyWALL. To access this screen, click Configuration > Object > Schedule.
Figure 336 Configuration > Object > Schedule
The following table describes the labels in this screen. See Section 36.2.1 on page
569 and Section 36.2.2 on page 570 for more information as well.
Table 168 Configuration > Object > Schedule
LABEL DESCRIPTION
One Time
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Object
References
Select an entry and click Object References to open a screen that
shows which settings use the entry. See Section 11.3.2 on page 232 for
an example.
# This field is a sequential value, and it is not associated with a specific
schedule.
Name This field displays the name of the schedule, which is used to refer to the
schedule.
Start Day /
Time
This field displays the date and time at which the schedule begins.
Stop Day /
Time
This field displays the date and time at which the schedule ends.